GEN 3 POWERED CASE TRIMMER 115v Motor (US and Canada Only)

Description

The Gen 3 powered case trimmer

Uses a powerful single speed 115v DC motor. The DC motor is extremely smooth and quiet and powers the spindle at around 1700rpms. Our enclosed aluminum motor mount shroud bolts directly to the bearing housing. We have also designed a custom machined pulley that is belt driven.

The DC motor offers maximum torque at 1700rps where you need it most. The DC motor also offers smoother and quieter operation. The motor has an in-line on/off switch for easy control.

Henderson Precision Tri-Trim Gen 3 Case Trimmer

Utilizes The Taper-Lock cutter head to create clean, consistent and completely trimmed cases in one operation. The cutter head has adjustable carbide blades that will last a lifetime and leave burr-free cuts on the mouth of the case. The Tri-Trim Gen 3 Case Trimmer itself is machined from 6061-t6 aluminum and a combination of 303 and 416 stainless steel. It has been engineered and manufactured 100% in America for a lifetime of service to the end user.

Case preparation is a necessary evil in the reloading process. The trim operation for rifle cases is especially time consuming unless you are using a Tri-Trim Gen 3 Case Trimmer. It is designed from the ground up to make trimming cases easy, fast and accurate. The cartridge case it held by a Brown and Sharpe type collet by the rim. These types of collets are used in the machine tool world because of their accuracy and repeatability. There are 4 collets for the various cartridges one would reload for, from .224 to .338 Lapua and everything in between. The cartridge case is placed into the collet base first and held in place while the handle is tightened to secure the case for the trimming operation. It only takes about ten degrees of rotation for the handle to secure the case and this design holds the case in the same position regardless of the rim diameter for consistent trim length. The collet assembly is mated to a carriage machined from solid 6061-t6 bar stock and precision fit to ground and polished stainless rods. The spindle is machined from stainless steel and rides in a set of sealed ball bearings which are press fit into the bearing housing which is also machined from solid 6061-t6 bar stock. All the aluminum parts are anodized. All the fasteners are black oxide coated.

Notes:

• The Tri-Trim case trimmer includes one Brown & Sharpe-style collet #1 (other sizes sold separately)
• The following cutter heads are available: 17, 204, 224, 243, 25, 264, 277, 284, 308, 338 (Sold separately)
• Cutting head blades are not pre-adjusted, and will need to be adjusted by the end user. QR Code on box takes customers to instructional video on cutting head adjustment.

Features:

• Trims most standard calibers
• Extremely consistent and will repeat to within 0.002″ with same brand brass
• Brown & Sharpe-type collet
• Taper-Lock cutter 14deg inside chamfer 30deg outside chamfer

Included:

• Collet #1
• Extra Drive belt
• Extra Cutter draw screw
• Adjustment screws for case length
• 5/32″ Allen wrench
• 11/16″ wrench

Collet #1 – (.379, .473 & .532 Dia) Fits:

222 Rem. Mag, 223 Rem, 225 Win, 22-250, 220 Swift, 243 Win, 6mm Dasher, 6×47 Lapua, 6XC, 244 Rem, 6mm B.R. Rem., 257, 25-06, 264 Win. Mag, 260 Rem, 6.5×47 Lapua, 6.5 Creed, 6mm Creed, 6mm SLR, 6.5×57 Mauser, 6.5mm Win, 6.5 Jap Mauser, 6.5×55 Swede, 6.5×55 SKAN, 270 Win, 270 Savage, 270 Gibbs, 270 Wby, 270 Ackley, 7×57 Mauser, 7mm Wby, 7mm-08, 280 Rem, 284 Win, 7mm Rem. Mag, 7mm B.R. Rem, 30-06, 308 Win, 300 win Mag, 300 Sav, 303 British