Professional Scope Mounting

Proper scope mounting is critical to your precision and accuracy. Does your rifle shoot erratically? Have you noticed inconsistencies from group to group? Does your point of impact shift unexpectedly? These are common issues caused by improper scope mounting. We have mounted hundreds of scopes and corrected just as many improper installations. Using the best equipment, we ensure your scope is perfectly mounted, level, and tracking true. If you need rings or a Picatinny rail, we stock products from Hawkins, Seekins, Vortex, Nightforce, Talley, and Leupold.

  • Lapping is done for all tube sizes, eliminating any stress on the scope body.
  • The scope rings and screws are degreased and cleaned to prevent movement from recoil.
  • Our mounting process eliminates any torque between the rings and the Picatinny rail.
  • The crosshairs are verified as level in the scope for optimal vertical tracking.
  • Proper base and ring torque settings are applied per the manufacturer's recommendation.
  • The spring tension is relieved from all screws and mounting surfaces, and anti-vibration thread locker is applied.
  • We laser bore-sight your rifle to save time when you finalize your zero.
  • We set the correct eye relief for all power settings.

Barrel Break-In & Range Zeroed

  • 40+ rounds fired at proper intervals.
  • Meticulously cleaned between firings.
  • Imperfections removed for a smooth, flawless bore.
  • Trigger pull weight measured and adjusted.
  • Action torque set to specifications.
  • Chronograph data collected and analyzed.
Starting at + ammunition.

$225

Call Or Text

(208)-484-1791

Factory Load Comparison

  • Multiple factory loads chronographed for extreme spread.
  • Ammunition verified for optimal precision and velocity.
  • All data, including velocities and ammunition lot numbers, provided.
  • Can be combined with barrel break-in service.

Custom Load Development

  • A variety of premium bullets and powders tested.
  • Velocities, standard deviation, and extreme spread tested for the best accuracy node.
  • Seating depth tested to maintain precision throughout the barrel’s life.
  • Precise adjustments made to fine-tune precision.
  • Complete load data and target validation provided.
  • Custom-loaded ammunition is available for purchase.

DIY Load Development Packs

  • Test 1: 4 powder charges, all with the same bullet and seating depth.
  • Test 2: 4 seating depths with the same bullet and powder charge.
  • Test 3: Repeat testing with different powder and bullet.
  • Testing determines the best powder and bullet combination for your rifle.

Rifle Guru "Xtreme" Custom-Loaded Ammunition

  • Only high-quality components are used in our custom ammunition.
  • Our 10-step precision brass preparation for shot-to-shot consistency.
  • Each step is completed by hand, with meticulous attention to detail.
  • Ammunition is loaded using the finest equipment for quality, not quantity.

Berger, Hornady, Barnes, Hammer, Lapua, Nosler, Norma, Sierra, Cutting Edge bullets.

  • .222 Remington
  • .223 Remington
  • 22 ARC
  • 22 Creedmoor
  • .243 Winchester
  • 6MM ARC
  • 6MM Creedmoor
  • 6 BRA
  • 6.5x47MM Lapua
  • 6.5 Creedmoor
  • 6.5-284 Norma
  • 6.5 PRC
  • 6.5 PRC Sherman Improved
  • 26 Nosler
  • .280 Ackley Improved
  • .308 Winchester
  • .30-06
  • 7MM Remington Magnum
  • 7MM WSM
  • 7 SAUM
  • 7 SAW
  • 7MM PRC
  • 28 Nosler
  • 7-300 Winchester Magnum
  • 28 Sherman Magnum
  • 300 Winchester Magnum
  • 300 PRC
  • 300 Remington Ultra Mag
  • 30 Nosler
  • 30-378 Weatherby
  • 300 Norma Mag
  • 300 Norma Mag Improved 40 Degree
  • 33 Nosler
  • 338 RUM
  • 338 Lapua Mag
  • 338 Lapua Mag Ackley Improved 40 Degree

Chronograph Services & Velocity Validation

  • Garmin Xero C1 and Bullet Seeker Doppler Chronographs.
  • Extreme spread and standard deviation recorded.
  • Rifle data for drop chart or custom scope turret provided.
  • Velocity validation shots between 800-1000 yards.
  • Rifle zeroed and ballistic solver data collected.
  • Velocity and bullet BC corrected.

AMP Induction Annealing and the Preparation of Precision Brass

  • Induction Annealing Service for Precision Brass.
  • 10-Step Precision Brass Preparation Process.

Professional Rifle Cleaning and Lubrication

  • Complete Disassembly of Rifle and Bolt.
  • Complete Removal of Carbon and Copper Fouling.
  • Chamber Guide and Professional Equipment Used to Protect the Barrel and Crown.
  • Chamber Cleaned and Lugs Properly Lubricated.
  • Protectant Applied to Metal Surfaces and Barrel.
  • Stock and Scope Cleaned, and Protectant Applied.
  • Rust Removed and Preventative Applied.
  • Trigger Assembly Cleaned.
  • Final Bore Scope Inspection of Barrel to Ensure Elimination of Carbon, Copper, and Carbon Ring.
STARTING AT

$150

Call Or Text

208-484-1791